• RV-3SB-S312 Serial Robot, Mitsubishi: It is an industrial robot with 6 degrees of freedom.

We use RoboDK for simulation and offline programming of industrial robots

• MiniDelta Robot, Omron: It is based on the Delta parallel robot structure patented by Clavel with 3 translational degrees of freedom. The robot has an integrated Omron SYSMAC controller that manages the movement of the three motors of the robot via EtherCAT. The open architecture of the controller allows its use as a test bench for different control algorithms.
• 3PRS Parallel Robot: powered by 3 direct-drive linear motors (Omron), this robot reaches high accelerations in three-degrees-of-freedom (translation and rotation axis z axes x and y). The robot control system is fully developed by the research group in an industrial computer (National Instruments PXI), allowing the integration of additional sensors for testing advanced control strategies.

Motion capture System (supplied by Target 3D):

8 Flex 13 camaras Flex 13 1,3 MPixel, 57.5° FOV (3.5mm) -800nm Long-Pass (IR) USB;

ceiling dimension: 6,3mts x 6,3mts x 2,6mts; SW Motive BODY 2.

• NI PCI 6115: data acquisition DAQ board  12-Bit 10 MS/s/ch Simultaneous-Sampling Multifunction DAQ; High-Speed Analog Inputs, 10 MS/s per Channel; Software-Selectable Onboard Anti-Aliasing Filters;    Two 12-Bit Analog Outputs, 4 MS/s Single Channel, 2.5 MS/s Dual Channel; 8 Digital I/O Lines; Two 24-Bit Counters; Analog and Digital Triggering.
• NI PXI 5105: high-density digitizer with eight simultaneously sampled channels; 12-bit vertical resolution; 60 MS/s real-time sampling rate; 60 MHz analog bandwidth; Deep onboard memory up to 512 MB for long acquisition times.
• NI PXI 6514: 32 Digital I/O Lines
• NI PXI 6713: 8 12-Bit Analog Outputs, 1 MS/s Single Channel
• NI PXI 6624: 8 counter/timers with 26 channel-to-channel isolated inputs and 8 channel-to-channel isolated outputs; 400 kHz maximum frequency with 48 VDC voltage range on inputs and outputs.
• NI USB 6008: Low-Cost, Bus-Powered Multifunction DAQ for USB12- or 14-Bit, Up to 48 kS/s, 8 Analog Inputs DAQ; 2 analog outputs at 12 bits, software-timed;  Multifunción de Bajo Costo; 8 entradas analógicas a 10 kS/s; one 32-bit, 5 MHz counteR
• Sensors: VS900 acoustic emission

• NI PXI 1042: General-Purpose 8-Slot Chassis; Dual-Core 1.9 GHz
• cRIO 9025: Real-Time Controller 800Mhz, 512MB RAM, 4GB SSD.
• sbRIO 9631: Real-Time Controller 266Mhz, 64MB RAM, 128MB SSD, 1M gate FPGA, 110 DIO, 32AI, 4AO, Ethernet and RS232
• myRIO: dual-core ARM® Cortex™-A9 real-time processing and Xilinx FPGA customizable I/O into the hands of students. 10 Analog Inputs, 6 Analog Outputs; 40 Digital I/O Lines.
• ZedBoard: Xilinx Zynq™-7000 All Programmable SoC (AP SoC), Dual-core ARM Cortex A9.

• TinkerKit Braccio Robots controlled via Arduino
• Lego Mindstorms NXT

• NI PXI 8512: 1-Port High-Speed/FD NI-XNET CAN Interface
• NI PXI 8531: 1-Port CANopen Interface
• NI PXI 8231: Gigabit Ethernet interface with up to 1000 Mbit/s (1000BASE-T) transfers

• IRB 1400 YuMi, ABB: It is a two-armed collaborative robot with 7 degrees of freedom. The robot is equipped with an integrated vision camera.